3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

How to regenerate a new VSP for my existing 3par 8000

 
Highlighted
Yaboto
Super Advisor

How to regenerate a new VSP for my existing 3par 8000

Hi,

I moved the vsp from one esx host to another, few days later I noticed the vsp could not be ''pinged'' because the vsp vm adapter could not bind to the physical. Since the troubleshooting is taking long and very frustrating, I have decided to regenerate a new vsp for the 3par 8000 storage.

Please help me with the procedures the methods or the process to achieve regenerating a new vsp for an existing 3par 8000.

Thanks

Yaboto

1 REPLY 1
Highlighted
Torsten.
Acclaimed Contributor

Re: How to regenerate a new VSP for my existing 3par 8000

Just install and configure the new vSP (network, contact, etc), then add the "existing 3PAR".


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!