3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Limiting Throughput for Asyncronous Periodic Volume Groups

SOLVED
Go to solution
frinku_hp
Occasional Advisor

Limiting Throughput for Asyncronous Periodic Volume Groups

Hello 3PAR minds,

 

This is on OS 3.1.2 MU3. I know there are two ways limiting the throughput, one by IMC and also by CLI. In my experience, some of the CLI settings like MTU size (customized) doesn't really come up in IMC but I can see on CLI. So do the throughput. If you set the throughput limitations by command line using 'setrcopytarget'. How do you show the settings? I can't see any show commands or any options in showrcopy.

 

Any inputs appreciated.

4 REPLIES
Dennis Handly
Acclaimed Contributor
Solution

Re: Limiting Throughput for Asyncronous Periodic Volume Groups

>How do you show the settings?

 

If set, it should show up under the Options column under "showrcopy links":

Target Node Address Status Options

frinku_hp
Occasional Advisor

Re: Limiting Throughput for Asyncronous Periodic Volume Groups

Hi,

 

The command 'showrcopy links' lists the column target, node, address, status and options. I guess if there is nothing listed or empty under 'Options', then no limitations set.

 

Regards.

Dennis Handly
Acclaimed Contributor

Re: Limiting Throughput for Asyncronous Periodic Volume Groups

>I guess if there is nothing listed or empty under Options, then no limitations set.

 

Yes, that's what I said.

frinku_hp
Occasional Advisor

Re: Limiting Throughput for Asyncronous Periodic Volume Groups

Thanks Dennis.