3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

PCI card is showing BlueBlnk

 
Highlighted
SV101
Occasional Advisor

PCI card is showing BlueBlnk

Hi all,

one of the PCI cards is showing BlueBlnk  even though checkhealth does not show any problem. 

pci card.PNG

 

How may i resolve this?

4 REPLIES 4
Highlighted
sanj_s
HPE Pro

Re: PCI card is showing BlueBlnk

Hello SV101,

 

It looks like the locate command has been used to identify the component.

This locate command for 3PAR 7000 and 3PAR 8000 storage systems, the default time to blink the LEDs is 15 minutes with a maximum time of one hour. For 3PAR 20000 system, the default time to blink the LEDs is 1 hour with a maximum time of 7 days. For all other systems, the default time to blink the LEDs is 60 seconds with a maximum time of
255 seconds. 

You may also refer the command line Guide for locate command.

HPE 3PAR Command Line Guide

However you may refer the following document to identify the LED location and its explanation.

HPE 3PAR StoreServ 7000 Storage - LED Indicators

HPE 3PAR StoreServ 8000 Storage - LED Indicators

HPE 3PAR StoreServ 20000 Storage - LED Indicators

 


Regards,

I am an HPE Employee


Accept or Kudo
Highlighted
SV101
Occasional Advisor

Re: PCI card is showing BlueBlnk

Hi,

locate command did not help.

We reseated also the card without any success

Now we are going to replace it.

I think it is defective. 

Highlighted
Torsten.
Acclaimed Contributor

Re: PCI card is showing BlueBlnk

What model is it?

SAS HBA in a 20000?

(Figure 13: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05237735 )

or drive enclosure?

Blinking blue means locate on, normally.

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
sanj_s
HPE Pro

Re: PCI card is showing BlueBlnk

HI SV101

I believe you have logged a case with HPE support. which is best as they will analyze the log an dprovide you the best solution.

Thanks for the reply.

Regards,

I am an HPE Employee


Accept or Kudo