3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Port listed as host path but is State:ready, Mode:initiator and Type:rcfc

dennischen
Advisor

Port listed as host path but is State:ready, Mode:initiator and Type:rcfc

Hi,

I do the checkhealth in my 3par system. But always get the alert as below:

Port port:0:0:2 Port listed as host path but is State:ready, Mode:initiator and Type:rcfc
Port port:1:0:2 Port listed as host path but is State:ready, Mode:initiator and Type:rcfc
Port port:2:0:2 Port listed as host path but is State:ready, Mode:initiator and Type:rcfc
Port port:3:0:2 Port listed as host path but is State:ready, Mode:initiator and Type:rcfc

 

The four ports are used as rcfc ports. Check the port status and rcopy status, and they are fine. So what does the alerts mean? How can I fix the alerts? Thanks in advance.

 

ss8400-1 cli% showrcopy

Remote Copy System Information
Status: Started, Normal

Target Information

Name ID Type Status Options Policy
ss8400-2 1 FC ready 2FF70002AC01C275 mirror_config

Link Information

Target Node Address Status Options
ss8400-2 0:0:2 20020002AC01C275 Up -
ss8400-2 1:0:2 21020002AC01C275 Up -
ss8400-2 2:0:2 22020002AC01C275 Up -
ss8400-2 3:0:2 23020002AC01C275 Up -
receive 0:0:2 20020002AC01C275 Up -
receive 1:0:2 21020002AC01C275 Up -
receive 2:0:2 22020002AC01C275 Up -
receive 3:0:2 23020002AC01C275 Up -

 

ss8400-1 cli% showport -rc
N:S:P State -----HwAddr----- Rate Type
0:0:2 ready 20020002AC01C22E 16Gbps rcfc
1:0:2 ready 21020002AC01C22E 16Gbps rcfc
2:0:2 ready 22020002AC01C22E 16Gbps rcfc
3:0:2 ready 23020002AC01C22E 16Gbps rcfc

 

 

 

3 REPLIES
Dennis Handly
Acclaimed Contributor

Re: Port listed as host path but is State:ready, Mode:initiator and Type:rcfc

Look at controlport, possibly rst to change it.

dennischen
Advisor

Re: Port listed as host path but is State:ready, Mode:initiator and Type:rcfc

Thanks, The controlport will affect the rcfc connection? 

Dennis Handly
Acclaimed Contributor

Re: Port listed as host path but is State:ready, Mode:initiator and Type:rcfc

>controlport will affect the rcfc connection?

 

It should.