3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Replaced disk is not admitted

 
Highlighted
Occasional Visitor

Replaced disk is not admitted

Hello,

I replace failed disk in our 3Par 7400 (2-Nodes configuration), but servicemag return error

3PAR-01 cli% servicemag resume 0 0
Are you sure you want to run servicemag?
select q=quit y=yes n=no: y
servicemag resume 0 0
... onlooping mag 0 0
... firmware is current on pd WWN [5000C50072507A10]
... checking for valid disks...
... checking for valid disks...
... disks not normal yet..trying admit/onloop again
... onlooping mag 0 0
... checking for valid disks...
... checking for valid disks...
... disks not normal yet..trying admit/onloop again
... onlooping mag 0 0
... checking for valid disks...
... checking for valid disks...
... disks not normal yet..trying admit/onloop again
... onlooping mag 0 0
... checking for valid disks...
Failed --
disk WWN [5000C50072507A10] not admitted
Failed --
disk WWN [5000C50072507A10] is not normal. Please use showpd -s to see details of disk state
servicemag resume 0 0 -- Failed
Command failed

admitpd not admitted disk too

3PAR-01 cli% admitpd 5000C50072507A10
Checking for drive table upgrade packages
admitted 0 out of 1 disks

 

We have another problem with this storage: one of two nodes fail.
And so all disks are in degraded mode ("missing_A_port").

Can degraded mode be the reason that the disk is not admitted?

1 REPLY 1

Re: Replaced disk is not admitted

> Can degraded mode be the reason that the disk is not admitted?

 

Seems reasonable.