cancel
Showing results for 
Search instead for 
Did you mean: 

SPconfigure

2942
Occasional Contributor

SPconfigure

good morning,

the SP dont generate SP ID but i make ping from SP to Inserv.

why this?

4 REPLIES
giladzzz
Honored Contributor

Re: SPconfigure

Hi

if your 3PAR is new and uninitiolized it should work

it must be on the same subnet as your SP.

if you have run OOTB and the 3PAR is configured than you must 

mark 'replaceing previos service proccesor"

and put service SP name "SP(and 3PAR serial) and then ip of

3par and username password.

Regards

 

2942
Occasional Contributor

Re: SPconfigure

hey giladzz

the 3Par is new and finish the OOTB, the SP and Inserv  be on the same subnet. the opcion 'replaceing previos service proccesor" I find in the inserv?

regards and Thank you for  comment in this post.

Dennis Handly
Acclaimed Contributor

Re: SPconfigure

>the option 'replacing previous service processor" I find in the StoreServ?

 

I doubt the array knows how do to this.  I.e. It can lock it out but not change it.

This has to be a SP option as Torsten said.

Torsten.
Acclaimed Contributor

Re: SPconfigure

The option is shown in the screenshot attached to the first post.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!