3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

SSMC 3.5 deployment issue

 
Occasional Visitor

SSMC 3.5 deployment issue

I'm new to SSMC. Trying to install SSMC 3.5 appliance using vmdk on my laptop using VMWare Workstation Player. Configured with 16GB/4CPUs. Installation seems to be successful, but steps and flow mentioned in the Admin guide weren't the same, may be due to Player.

I could get it to the initial prompt with ssmcadmin/ssmcadmin and that provided the prompt for a new password. But the password change isn't allowing the login on the console with "Login Incorrect" error.

I know it doesn't seem to be a standard config, but as it gets to the prompt to change the password, I was hoping that it moves from there. Any help is appreciated.

 

1 REPLY 1
Highlighted

Re: SSMC 3.5 deployment issue

You should not run the SSMC appliance on a Laptop !!!

SSMC is continously communicating with the array(s) and should be running on a ESX/HyperV server.

Regarding the password question.

If you login to the TUI/appliance-concole the very first time, the appliance will force you to change the ssmcadmin password.

Are you saying that you are not able to login with the changed password ? 

If yes, can you try the initial-default one ?

 

I am an HPE Employee

Accept or Kudo