3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Servicemag resume failed,P1000 3Par V400

 
TheUglyNakedGuy
Occasional Contributor

Servicemag resume failed,P1000 3Par V400

Replace a failed hard disk on our 3PAR V400.

Initiated the command "servicemag start -pdid 15 and the command was successful.

Next we replaced the new disk.

Then we inititated the command "servicemag resume 0 9"  very soon (We cant sure whether the plug led has been off)but this command failed and we got the following error:

V400 cli% servicemag status -d
Cage 0, magazine 9:
A servicemag resume command failed on this magazine.
The command completed at Thu Mar 30 14:02:56 2017.
The output of the servicemag resume was:
servicemag resume 0 9
... mag 0 9 already onlooped
... firmware is current on pd WWN [2000B45253996193] Id [12]
... firmware is current on pd WWN [2000B4525397CB59] Id [13]
... firmware is current on pd WWN [2000B4525397BB3B] Id [14]
... firmware is current on pd WWN [5000CCA04090DD04]
... firmware is current on pd WWN [2000B4525397B911] Id [15]
... checking for valid disks...
... checking for valid disks...
... disks not normal yet..trying admit/onloop again
... onlooping mag 0 9
Failed --
DC2/DC4 cmd 3: enclosure returned error: Hardware is busy (0x8)

The replaced disk pdid 15 remains in system. 

V400 cli% showpd
----Size(MB)----- ----Ports----
Id CagePos Type RPM State Total Free A B Cap(GB)
--- 0:9:3 FC 15 failed 0 0 0:6:1- 1:6:1- 0
0 0:0:0 FC 15 normal 559104 365568 0:6:1* 1:6:1 600
1 0:0:1 FC 15 normal 559104 364544 0:6:1 1:6:1* 600
2 0:0:2 FC 15 normal 559104 366592 0:6:1* 1:6:1 600
3 0:0:3 FC 15 normal 559104 371712 0:6:1 1:6:1* 600
5 0:1:1 FC 15 normal 559104 367616 0:6:1 1:6:1* 600
6 0:1:2 FC 15 normal 559104 365568 0:6:1* 1:6:1 600
7 0:1:3 FC 15 normal 559104 371712 0:6:1 1:6:1* 600
8 0:8:0 SSD 150 normal 94208 0 0:6:1* 1:6:1 100
9 0:8:1 SSD 150 normal 94208 0 0:6:1 1:6:1* 100
10 0:8:2 SSD 150 normal 94208 0 0:6:1* 1:6:1 100
11 0:8:3 SSD 150 normal 94208 0 0:6:1 1:6:1* 100
12 0:9:0 FC 15 normal 559104 0 0:6:1* 1:6:1 600
13 0:9:1 FC 15 normal 559104 0 0:6:1 1:6:1* 600
14 0:9:2 FC 15 normal 559104 0 0:6:1* 1:6:1 600
15 0:9:3? FC 15 failed 559104 0 ----- ----- 600

V400 cli% showpd -state 15
Id CagePos Type -State- ------------------------------Detailed_State-------------------------------
15 0:9:3? FC failed vacated,missing,invalid_media,multiple_chunklets_media_bad,spinup,servicing
---------------------------------------------------------------------------------------------------
1 total

 

V400 cli% showversion
Release version 3.1.2 (MU1)
Patches: P04

Component Name Version
CLI Server 3.1.2 (P04)
CLI Client 3.1.2 (P04)
System Manager 3.1.2 (MU1)
Kernel 3.1.2 (MU1)
TPD Kernel Code 3.1.2 (MU1)

 

Thanks for your comments