3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Setup Alerts in SSMC for a failed disk

 
Mainecoon
Occasional Advisor

Setup Alerts in SSMC for a failed disk

Is there a way to send an email alert when an actual drive failed? Looking at Treshold alerts you can select

physical disk but there is no criteria related to a component status change orso.

any thoughts on this?

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Setup Alerts in SSMC for a failed disk

Not sure if you can do this in SSMC, but you can do this within the SP.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Cali
Honored Contributor

Re: Setup Alerts in SSMC for a failed disk

The SP sending E-Mails on all Hardware Failures by default.

No need for confugure in SSMC.

That was not planned in this way.