Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Showports giving error state on E200

SriSriSri
Visitor

Showports giving error state on E200

Hi All,

 

All of a sudden, all the host facing FC ports are in error state. Nothing changed and this is really puzzling. I can understand if it's just one port, but all at the same time? i tried controlport offline and controlport rst, but no luck

 

Any help would be greatly appreciated! We some data on there that turned out to be not crucial, but critical at this time.

 

3PARSAN cli% showport
N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type
0:0:1 initiator ready 2FF70002AC00055F 20010002AC00055F disk
0:0:2 initiator ready 2FF70002AC00055F 20020002AC00055F disk
0:3:1 target error 2FF70002AC00055F 20310002AC00055F host
0:3:2 target error 2FF70002AC00055F 20320002AC00055F host
1:0:1 initiator ready 2FF70002AC00055F 21010002AC00055F disk
1:0:2 initiator ready 2FF70002AC00055F 21020002AC00055F disk
1:3:1 target error 2FF70002AC00055F 21310002AC00055F host
1:3:2 target error 2FF70002AC00055F 21320002AC00055F host

 

 

3PARSAN cli% showport -sfp
N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
0:0:1 OK FINISAR_CORP. 2.10 No No No Yes
0:0:2 OK FINISAR_CORP. 2.10 No No No Yes
0:3:1 - - - - - - -
0:3:2 - - - - - - -
1:0:1 OK FINISAR_CORP. 2.10 No No No Yes
1:0:2 OK FINISAR_CORP. 2.10 No No No Yes
1:3:1 - - - - - - -
1:3:2 - - - - - - -

 

Thanks!

3 REPLIES
Sheldon Smith
Honored Contributor

Re: Showports giving error state on E200

Very strange. Any change on switches?


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!
SriSriSri
Visitor

Re: Showports giving error state on E200

No change on the switches.

 

The first time i looked, one of the port was still showing connected on the switch on FL, i forced the port to F it just drops off completely. Doesnt reconnect when i set the switch port back to auto. 

 

There are other SAN systems on the switch which are communicating fine. Just the E200.

 

Faulty module?

Sheldon Smith
Honored Contributor

Re: Showports giving error state on E200

Apparently.

Definitely time to contact HP Support.

 

Please let us know what they find.


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!