Using Glob patterns in CLI seems inconsistant across commands

[DHCSBAS]

Hi

I'm trying to get a handle on why Glob pattern matching seems inconsistant across commands.

I'm trying to perform the statcmp command to view cache information from a select set of VV's which yeilds no information, yet if I use the same Glob pattern in a showvv I do get the correct VV's that I'm after returned. Am I doing something wrong?

Cheers

MarkA

This command doesn't work:

DHDRH3PAP001 cli% statcmp -v -n BASP025*
 11:17:26 06/06/2014 ---- Current ----- ----- Total ------
 VVid VVname Type Accesses Hits Hit% Accesses Hits Hit%
 Press the enter key to stop...

 DHDRH3PAP001 cli%

This does work (note I've left off some of the VV in the list below):

DHDRH3PAP001 cli% statcmp -v
 11:12:43 06/06/2014 ---- Current ----- ----- Total ------
 VVid VVname Type Accesses Hits Hit% Accesses Hits Hit%
 0 admin Read 0 0 0 0 0 0
 0 admin Write 0 0 0 0 0 0
 1 .srdata Read 0 0 0 0 0 0
 1 .srdata Write 0 0 0 0 0 0

.. ETC ..
 753 DSP109 Write 1 0 0 1 0 0
 943 BASP025_D_May Read 0 0 0 0 0 0
 943 BASP025_D_May Write 0 0 0 0 0 0
 945 BASP025_E_May Read 0 0 0 0 0 0
 945 BASP025_E_May Write 0 0 0 0 0 0
 949 BASP025_H_May Read 0 0 0 0 0 0
 949 BASP025_H_May Write 0 0 0 0 0 0

.. ETC ..

Press the enter key to stop...

If I  showvv with the pattern I get the VV's I'm after:

DHDRH3PAP001 cli% showvv BASP025*
 -Rsvd(MB)-- -(MB)-
 Id Name Prov Type CopyOf BsId Rd -Detailed_State- Adm Snp Usr VSize
 943 BASP025_D_May snp vcopy DHDRHBASP025_D 387 RW normal -- -- -- 61440
 1065 BASP025_D_Thu snp vcopy DHDRHBASP025_D 387 RW normal -- -- -- 61440
 1045 BASP025_D_Wed snp vcopy DHDRHBASP025_D 387 RW normal -- -- -- 61440
 945 BASP025_E_May snp vcopy DHDRHBASP025_E 388 RW normal -- -- -- 10240
 1067 BASP025_E_Thu snp vcopy DHDRHBASP025_E 388 RW normal -- -- -- 10240
 1047 BASP025_E_Wed snp vcopy DHDRHBASP025_E 388 RW normal -- -- -- 10240
 1069 BASP025_G_Thu snp vcopy DHDRHBASP025_G 391 RW normal -- -- -- 2048
 1049 BASP025_G_Wed snp vcopy DHDRHBASP025_G 391 RW normal -- -- -- 2048
 949 BASP025_H_May snp vcopy DHDRHBASP025_H 390 RW normal -- -- -- 4096
 1071 BASP025_H_Thu snp vcopy DHDRHBASP025_H 390 RW normal -- -- -- 4096
 1051 BASP025_H_Wed snp vcopy DHDRHBASP025_H 390 RW normal -- -- -- 4096
 ----------------------------------------------------------------------------------------
 11 total 0 0 0 231424
 DHDRH3PAP001 cli%

[Dennis Handly]

>Am I doing something wrong?

Have you read the documentation?  statcmp is one of the few commands that use REs and not file matching patterns:

Patterns are specified as regular expressions.

So you need: statcmp -v -n BASP025.*