3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

What is the failed size/capacity at 3par cli output?

SOLVED
Go to solution
thantzinoo
Occasional Collector

What is the failed size/capacity at 3par cli output?

When I check command showpd -s, I found output as below?

Id CagePos Type -State-- Size Volume Spare Free Unavail Failed
76 3:16:0 FC degraded 838656 0 0 309248 0 529408
------------------------------------------------------------------
1 total 838656 0 0 309248 0 529408

Please point me with some explaination. Check at attached picture. 

 


03.jpg

 

 

Thant Zin Oo
Sales & Service Engineer
Lotus Technology Company
http://www.lotus-tec.com
3 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: What is the failed size/capacity at 3par cli output?

Hard to read because of the format ...

 

Looks like the disk 3:16 went bad and is now being vacated, I think it will be shown as failed soon.

Check the events for details.

Check if the number is growing ... if the disk is vacated, it will be shown as failed with a amber LED on.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dennis Handly
Acclaimed Contributor

Re: What is the failed size/capacity at 3PAR cli output?

>When I check command showpd -s, I found output as below?

 

showpd -s should provide the reason under Detailed_State:  (What HPE 3PAR OS version do you have?)

Id CagePos Type -State- -Detailed_State- -SedState--

thantzinoo
Occasional Collector

Re: What is the failed size/capacity at 3par cli output?

I take action command "controlpd clearerr PD Name" . After fixing with these command, we got degrade PD as Normal Condition. 

But after 4 days, PD was degraded again. So We do replace the PD with new spare. 

Thanks for your suggestion. It is good idea for troubleshooting. 

Regards, 

Thant Zin Oo
Sales & Service Engineer
Lotus Technology Company
http://www.lotus-tec.com