3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

What is the vsp root password after initial

What is the vsp root password after initial

Hi every body

the vsp default root password is none,

but when I finished the first setup,

I can't use the root without none password,

What is the root password?

 

Thanks

4 REPLIES
Torsten.
Acclaimed Contributor

Re: What is the vsp root password after initial

Usually you use 3parcust user and set a password during initialization. Refer to the install guide.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: What is the vsp root password after initial

Hi Torsten:
but 3parcust can't set root password,
and 3parcust can't perform the root command,
just like [cat etc/sysconfig/network-scripts ifcfg-eth0]
How can I get the root password?

Thanks!
Torsten.
Acclaimed Contributor

Re: What is the vsp root password after initial

The IP is set during initialization:

 

 

HP 3PAR StoreServ 7000 Storage Installation Guide_Current - Foxit Reader.jpg

 

Refer to the install manual.

 

Changes are made with predefined scripts, you can't get root.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
rkjha_hp
Advisor

Re: What is the vsp root password after initial

If you are trying ssh or telnet to VSP, it will not accept a null password. you have to connect to console to proceed without password.

rgds