Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

hp 3par 7200 , out of the box procedure , faile ,,, Not all of the disks are in a valid state

amir_sh
Frequent Advisor

hp 3par 7200 , out of the box procedure , faile ,,, Not all of the disks are in a valid state

hi

i have problem when i want ,,,out of the  box procedure,,.

Not all of the disks are in a valid state.
Starting system stress test...
Checking for drive table upgrade packages
Unable to proceed because the system is not connected to any disks.

Admin volume could not be properly created!

Exiting Out-Of-The-Box Experience...

 

i have 6 * 450 sas (compatibility list)ok.

 

 

thanks

 

 

  

4 REPLIES
giladzzz
Honored Contributor

Re: hp 3par 7200 , out of the box procedure , faile ,,, Not all of the disks are in a valid state

hi 

When you start Out of the Box

does the system show all hardware ?

Have you tried to run option 6 =Set up the system to wipe and rerun ootb

is this a new system ?

if you have only 6 disks it's a problem I think you need minimum 8 (the disks with the node enclosure?)

Regards

if this helps give Kudo

 

 

amir_sh
Frequent Advisor

Re: hp 3par 7200 , out of the box procedure , faile ,,, Not all of the disks are in a valid state

HI

in fist time i use number 6 and ,In the past, I used my 8 disks.
But I had the same problem.
Is the corresponding hardware version

 

Dennis Handly
Acclaimed Contributor

Re: HPE 3PAR 7200, out of the box procedure failed Not all of the disks are in a valid state

What does "showpd -s" and showcage show?

Pastor_4
Occasional Contributor

Re: hp 3par 7200 , out of the box procedure , faile ,,, Not all of the disks are in a valid state

Did you solve this???