3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

invalid, inquiry_failed, invalid_firmware

 
Highlighted
-RAN-
Occasional Contributor

invalid, inquiry_failed, invalid_firmware

We have a failed disk on our 3par and so we've purchased a disk online.

Upon recevig our purchased drive we then remove the failed drive and insert the new one.

For some reason new drives has a status of failed almost all, then doing the showpd -s it says invalid, inquiry_failed, invalid_firmware

Can someong guide me on this?

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: invalid, inquiry_failed, invalid_firmware

Please speciy array model, exact disk model and 3PAROS version.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Cali
Honored Contributor

Re: invalid, inquiry_failed, invalid_firmware

There is a known Bug regarding this.

The L2 have a Batch to fix it.


======================
That was not planned in this way.
-RAN-
Occasional Contributor

Re: invalid, inquiry_failed, invalid_firmware

New Drive Model is ST31000340NS

3par Version is 2.3.1