3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

login failed when I configure a new 3par (OOTB)

louisji2008
Frequent Advisor

login failed when I configure a new 3par (OOTB)

I have a 4 node 8400, its OS is 3.2.2.
It is a new one and I need install and configure it.
After input 'console' when the system startup, the system wait for around 30 seconds and displayed 'login time out'. There is no password input step.

I've tried every 4 nodes and reboot the whole 3par 8400, nothing changed.

Is this a product issue?

How time flies~~~
1 REPLY
Torsten.
Acclaimed Contributor

Re: login failed when I configure a new 3par (OOTB)

Better follow the installation guide. Setup the (v)SP first, add the array, set a password from the SP during the install procedure.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!