3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

servicemag resume failed

kimtran
Occasional Visitor

servicemag resume failed

Dear, 

We have a 20840 Serv Storage .  We simulate a SSD failed by command Controlpd chmederr set -2  <wwn >. After that we clearing the failed status without re-seat this SDD by command controlpd clearerr. Then we start servicemag command to re-use this SDD but this process is failed by some chunklet cannot resume :

Example of err that show in servicemag status -d " servicemag resume 1 11 -- Failed',....

What's problem here ?

 

1 REPLY
Dennis Handly
Acclaimed Contributor

Re: servicemag resume failed

Unfortunately there isn't enough info with "failed".  What does "showpd -s" show for that PD?