HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

set factory default-3par 8440

 
SOLVED
Go to solution
francisco82
Contributor

set factory default-3par 8440

good mornign team,

which is the  porcess to set fatory default a 3par 8440?

regards...

 

2 REPLIES

Re: set factory default HPE 3PAR 8440

Why do you want to do this?  Have you looked at the console menu for deinstall or wipe?

setsysmgr has a wipe subcommand that will delete all data.

Cali
Honored Contributor
Solution

Re: set factory default-3par 8440

Look for: HPE 3PAR StoreServ 8000 Storage Service and Upgrade Guide

Recore you License, as in the Guide described.

Serial Console > 6 or 8

3PAR Console Menu

1. Out Of The Box Procedure
2. Re-enter network configuration
3. Update the CBIOS
4. Enable or disable CLI error injections
5. Perform a Node-to-Node rescue
6. Set up the system to wipe and rerun ootb
7. Cancel a wipe
8. Perform a deinstallation
9. Update the system for recently added hardware (admithw)
10. Check system health (checkhealth)
11. Finish SP-to-Node rescue procedure
12. Exit

 


======================
That was not planned in this way.