3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

what's the steps to install a pair of 10Gb adapters to 3PAR 8400 (2nodes)?

 
SOLVED
Go to solution
Highlighted
louisji2008
Frequent Advisor

what's the steps to install a pair of 10Gb adapters to 3PAR 8400 (2nodes)?

what's the steps to install a pair of 10Gb adapters to 3PAR 8400 (2nodes)?

And could I add the two adapters online ( install them one by one)?

Thanks you!

 

How time flies~~~
2 REPLIES 2
Highlighted
Cali
Honored Contributor
Solution

Re: what's the steps to install a pair of 10Gb adapters to 3PAR 8400 (2nodes)?

I have done this a few Weeks ago online.

First check if the Adapter is supportet with the OS (some Adapters need 3.3.1.).

Check System Health, if OK, shutdown one Node.

If LED is Blue, remove Cabling and the Node (Fan go Up, this is OK).

Insert the Adapter and then the Node.

Attach Cabling, wait for resync.

If system is OK (checkhealth) move to the next.

Remember: If one Node is down, Performance goes down, Good Idea to do this in Low Performance Time, (No Working, No Backup).


======================
That was not planned in this way.
Highlighted
louisji2008
Frequent Advisor

Re: what's the steps to install a pair of 10Gb adapters to 3PAR 8400 (2nodes)?

Thank you very much. Don't know why I cannot accept your reply as the solution, but I think this will work. And I will update the result after I do this.
How time flies~~~