HPE Community
HPE 3PAR StoreServ Storage
1751765 Members
5153 Online
108781 Solutions
New Discussion

Re: 3Par 7400 OOTB Procedure

 
NoahH
Occasional Contributor

‎05-09-2019 01:43 PM

‎05-09-2019 01:43 PM

3Par 7400 OOTB Procedure

Hi there

I want to do the Out of the box procedure on a 3Par 7400. After this was done I wasn't able to log in with 3paradm/3pardata anymore. Now I tried to resett the system again. On the second try the procedure stocks on the verify-step after I cointinued. ("Please verify your InForm OS versions are correct). Unfourtunately we do not have an active support contract of this system. Is there any way to solve this problem without HPE-Support?

Thanks a lot

 

0 Kudos
Reply
1 REPLY 1
NoahH
Occasional Contributor

‎05-10-2019 02:37 PM

‎05-10-2019 02:37 PM

Re: 3Par 7400 OOTB Procedure

I found the error. The disks which I inserted to the array (8 disks) are in "invalid block size" state because they ran in another 3par with an other OS version before. When I use other drives with the right block size the OOTB works correctly. Is there any way to format the wrong disks with the write block size?

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.