HPE 3PAR StoreServ Storage
1751694 Members
5347 Online
108781 Solutions
New Discussion юеВ

3PAR Smart SAN (can't get it to work)

 
SOLVED
Go to solution
vmuniverse
Advisor

3PAR Smart SAN (can't get it to work)

Hello, I have tried to get Smart SAN working, but somehow it doens't work.

I have the following:

HPE 3PAR 8200 (latest firmware, latest ssmc, accordingly to SPOCK)

HPE SN3000B (8.10b) planning to upgrade to v8.0.2c

I have the Smart SAN licensed on my 3PAR, I also executed the command to enable Smart SAN on my HPE SN3000B Switches. I have certified Qlogic 16GB HBA's on my Windows 2016 NANO servers.

When I check my FC Switches, it says that it has Smart SAN 1.0 enabled (how can I upgrade it to Smart SAN 2.0?)

I try to make TDPZ Zones in SSMC, but no zones are created. I can create a host and choose FC. Then I can select the WWN numbers from the specific host.

Do I need to use CLI commands for our FC switches to create the zones? What am I doing wrong? We are runnig Windows 2016 NANO server. When I check my 3PAR ssmc, I can choose "Windows Server 2016" so it is supported, right?

9 REPLIES 9
Dennis Handly
Acclaimed Contributor

Re: 3PAR Smart SAN (can't get it to work)

> HPE 3PAR 8200 (latest software, accordingly to SPOCK)

 

What exact version?  showversion -b

 

> Do I need to use CLI commands for our FC switches to create the zones?

 

I would recommend doing that.

What ports are connected to your fabric?

showport

What switches are connected?

showportdev fcswitch <N:S:P>        # a port connected to the fabric.

showportdev fcfabric <N:S:P>         # list of WWNs connected.

 

There are other showportdev subcommands for Smart San zoning.

vmuniverse
Advisor

Re: 3PAR Smart SAN (can't get it to work)

Thanks for the reply,

here are the results from the commando's:

 

showversion -b:

CLI Server: 3.2.2.642
CLI Client: 3.2.2.642
System Manager: 3.2.2.642 (P59)
Kernel: 3.2.2.612 (MU4)
TPD Kernel Code: 3.2.2.612 (MU4)
TPD Kernel Patch: 3.2.2.642 (P59)

 

SERVER-001 cli% showport
N:S:P      Mode   State ----Node_WWN---- -Port_WWN/HW_Addr- Type Protocol Label Partner FailoverState
0:0:1    target   ready 2FF7************   2001************ host       FC     -   1:0:1          none
0:0:2    target   ready 2FF7************   2002************ host       FC     -   1:0:2          none
0:1:1 initiator   ready 5000************   5000************ disk      SAS  DP-1       -             -
0:1:2 initiator   ready 5000************   5000************ disk      SAS  DP-2       -             -
0:3:1      peer offline                -       941********* free       IP   IP0       -             -
1:0:1    target   ready 2FF7************   2101************ host       FC     -   0:0:1          none
1:0:2    target   ready 2FF7************   2102************ host       FC     -   0:0:2          none
1:1:1 initiator   ready 5000************   5000************ disk      SAS  DP-1       -             -
1:1:2 initiator   ready 5000************   5000************ disk      SAS  DP-2       -             -
1:3:1      peer offline                -       941********* free       IP   IP1       -             -
-----------------------------------------------------------------------------------------------------

SERVER-001 cli% showportdev fcswitch 0:0:1
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH1     switch    24 Brocade Communications, Inc.
SERVER-001 cli% showportdev fcswitch 0:0:2
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH2     switch    24 Brocade Communications, Inc.
SERVER-001 cli% showportdev fcswitch 1:0:1
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH1     switch    24 Brocade Communications, Inc.
SERVER-001 cli% showportdev fcswitch 1:0:2
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH2     switch    24 Brocade Communications, Inc.


SERVER-001 cli% showportdev fcfabric 0:0:1

Name:           1000***********
Logical Name:   FC-SWITCH1
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2102************ N-Port
1      2001************       F-Port Online  unknown 2001************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

SERVER-001 cli% showportdev fcfabric 0:0:2
Name:           1000************
Logical Name:   FC-SWITCH2
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2101************ N-Port
1      2001************       F-Port Online  unknown 2002************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

SERVER-001 cli% showportdev fcfabric 1:0:1
Name:           1000************
Logical Name:   FC-SWITCH2
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2101************ N-Port
1      2001************       F-Port Online  unknown 2002************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

SERVER-001 cli% showportdev fcfabric 1:0:2
Name:           1000************
Logical Name:   FC-SWITCH1
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2102************ N-Port
1      2001************       F-Port Online  unknown 2001************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

 

 

 

 

vmuniverse
Advisor

Re: 3PAR Smart SAN (can't get it to work)

Hello, thank you for the response!

Here are the results:

showversion -b:

CLI Server: 3.2.2.642
CLI Client: 3.2.2.642
System Manager: 3.2.2.642 (P59)
Kernel: 3.2.2.612 (MU4)
TPD Kernel Code: 3.2.2.612 (MU4)
TPD Kernel Patch: 3.2.2.642 (P59)

SERVER-001 cli% showport
N:S:P      Mode   State ----Node_WWN---- -Port_WWN/HW_Addr- Type Protocol Label Partner FailoverState
0:0:1    target   ready 2FF7************   2001************ host       FC     -   1:0:1          none
0:0:2    target   ready 2FF7************   2002************ host       FC     -   1:0:2          none
0:1:1 initiator   ready 5000************   5000************ disk      SAS  DP-1       -             -
0:1:2 initiator   ready 5000************   5000************ disk      SAS  DP-2       -             -
0:3:1      peer offline                -       941********* free       IP   IP0       -             -
1:0:1    target   ready 2FF7************   2101************ host       FC     -   0:0:1          none
1:0:2    target   ready 2FF7************   2102************ host       FC     -   0:0:2          none
1:1:1 initiator   ready 5000************   5000************ disk      SAS  DP-1       -             -
1:1:2 initiator   ready 5000************   5000************ disk      SAS  DP-2       -             -
1:3:1      peer offline                -       941********* free       IP   IP1       -             -
-----------------------------------------------------------------------------------------------------

SERVER-001 cli% showportdev fcswitch 0:0:1
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH1     switch    24 Brocade Communications, Inc.
SERVER-001 cli% showportdev fcswitch 0:0:2
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH2     switch    24 Brocade Communications, Inc.
SERVER-001 cli% showportdev fcswitch 1:0:1
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH1     switch    24 Brocade Communications, Inc.
SERVER-001 cli% showportdev fcswitch 1:0:2
------Name------ Logical_Name Type   Ports -----------Vendor-----------
**************** FC-SWITCH2     switch    24 Brocade Communications, Inc.


SERVER-001 cli% showportdev fcfabric 0:0:1

Name:           1000***********
Logical Name:   FC-SWITCH1
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2102************ N-Port
1      2001************       F-Port Online  unknown 2001************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

SERVER-001 cli% showportdev fcfabric 0:0:2
Name:           1000************
Logical Name:   FC-SWITCH2
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2101************ N-Port
1      2001************       F-Port Online  unknown 2002************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

SERVER-001 cli% showportdev fcfabric 1:0:1
Name:           1000************
Logical Name:   FC-SWITCH2
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2101************ N-Port
1      2001************       F-Port Online  unknown 2002************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

SERVER-001 cli% showportdev fcfabric 1:0:2
Name:           1000************
Logical Name:   FC-SWITCH1
Type:           switch
Vendor:         Brocade Communications, Inc.
Model:          118.1
Release:        v8.0.2b
Port Count:     24
Number ------Name------         Type State     Speed Attached Port      Type
0      2000************       F-Port Online  unknown 2102************ N-Port
1      2001************       F-Port Online  unknown 2001************ N-Port
2      2002************       F-Port Online  unknown 5001************ N-Port
3      2003************       F-Port Online  unknown 5001************ N-Port
4      2004************       F-Port Online  unknown 5001************ N-Port
5      2005************       F-Port Online  unknown 5001************ N-Port
6      2006************       F-Port Online  unknown 5001************ N-Port

 

 

 

 

Dennis Handly
Acclaimed Contributor

Re: 3PAR Smart SAN (can't get it to work)

Ok, you have two switches: FC-SWITCH1 & FC-SWITCH2

Which ports on the two switches are connected to your hosts?  I see 7 ports in use on both.

Or course some of those ports are connecting to the array.

 

vmuniverse
Advisor

Re: 3PAR Smart SAN (can't get it to work)

Hi,

Port 0 & 1 are the 3par array.

Ports 2 till 6 are all Hosts (nano servers)

The hosts (Windows NANO serveras) all begin with 5001... as WWN numbers.

 

Dennis Handly
Acclaimed Contributor

Re: 3PAR Smart SAN (can't get it to work)

> Ports 2 till 6 are all Hosts (nano servers)

 

So this shows all of the possible connections and you now need to zone them?

vmuniverse
Advisor

Re: 3PAR Smart SAN (can't get it to work)

Ok, so this is what I did:

I executed the following command on the 3PAR CLI:

createhost -port 0:0:1,0:0:2,1:0:1,1:0:2 SERVERNAME 5001***************** 5001******************

I see now that a new Host is been created on the SSMC, I also see that new Zones are auto created on the switches!

In SSMC under Hosts I opened the Map and see a diagram where there are 4 connections to the new created host.

Is this how Smart San works?

Dennis Handly
Acclaimed Contributor
Solution

Re: 3PAR Smart SAN (can't get it to work)

> Is this how Smart San works?

 

Yes, createhost -port allows the array to create zones on the switch.

You can use this to see all zones: showportdev tzone

And add the N:S:P for more details on each port.

vmuniverse
Advisor

Re: 3PAR Smart SAN (can't get it to work)

thanks!