3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

How much i will get the usable space in the 3 PAR storage in RAID 1+0

 
Highlighted
New Member

How much i will get the usable space in the 3 PAR storage in RAID 1+0

i have 56 HDD with  1.2TB+SW 10K SFF HDD . Kindly assist how much usage space i will get.

 

Thanks in advance.

2 REPLIES 2
Highlighted

Re: How much i will get the usable space in the 3 PAR storage in RAID 1+0

if you want to understand system raw space wise free space then check below commands,

showpd -c

showsys -space

If you wabt to understand logical space then check below command,

showspace

You can check Command line guide and look for options to be used with this command like if you want to check space CPG wise,

showspace -cpg <CPG_name>

Above command output you should look for "LDFree" column. That would be usable space for that CPG.

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************


I work for HPE
Accept or Kudo
Highlighted

Re: How much i will get the usable space in the 3 PAR storage in RAID 1+0

Can you please help us to understand if the issue got resolved or not?

If issue got resolved then how? This will help for everyone who are all following your forum.

Also request you to mark the forum as resolved if there is no more outstanding query from your end on this issue.

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************


I work for HPE
Accept or Kudo