HPE 3PAR StoreServ Storage
1745786 Members
3700 Online
108722 Solutions
New Discussion юеВ

SAN boot with VMWARE on BL860c

 
placitasmd
Frequent Advisor

SAN boot with VMWARE on BL860c

Looking for any docs on booting a BL860c running Vmware connected to a 3PAR disk array.
Mark E Duhamel
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: SAN boot with VMWARE on BL860c

I'm not absolutely sure about, but I don't think that vmware can run on this Integrity blade at all. Check the software vendor site for the status of support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
placitasmd
Frequent Advisor

Re: SAN boot with VMWARE on BL860c

OOPS.... It is a BL460c not an 860c
Mark E Duhamel
Sebastian.Koehler
Honored Contributor

Re: SAN boot with VMWARE on BL860c

Check out SPOCK / http://www.hp.com/storage/spock for BFS manuals. I'd not recommend doing it, unless you need it with VirtualConnect server profiles. A local flash drive or even the new network boot will be a much better solution in most of the cases.

Regards,
Sebastian