HPE 3PAR StoreServ Storage
1745781 Members
3639 Online
108722 Solutions
New Discussion юеВ

Re: SAN boot with VMWARE on BL860c

 
placitasmd
Frequent Advisor

SAN boot with VMWARE on BL860c

Looking for any docs on booting a BL860c running Vmware connected to a 3PAR disk array.
Mark E Duhamel
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: SAN boot with VMWARE on BL860c

I'm not absolutely sure about, but I don't think that vmware can run on this Integrity blade at all. Check the software vendor site for the status of support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
placitasmd
Frequent Advisor

Re: SAN boot with VMWARE on BL860c

OOPS.... It is a BL460c not an 860c
Mark E Duhamel
Sebastian.Koehler
Honored Contributor

Re: SAN boot with VMWARE on BL860c

Check out SPOCK / http://www.hp.com/storage/spock for BFS manuals. I'd not recommend doing it, unless you need it with VirtualConnect server profiles. A local flash drive or even the new network boot will be a much better solution in most of the cases.

Regards,
Sebastian