3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

SSMC 3.3.1 "Fabrics" view of Brocade ports

 
Highlighted
Occasional Contributor

SSMC 3.3.1 "Fabrics" view of Brocade ports

Has anybody seen the issue that the Fabric ports view in SSMC displays the wrong ports for connection to SN6600B Brocade Switches. Please see screenshot in the attachment.....8440 Ports.jpg

5 REPLIES 5
Highlighted

Re: SSMC 3.3.1 "Fabrics" view of Brocade ports

Thanks for highlighting these but SSMC 3.3.1 is old and you should upgrade to SSMC 3.7

Download link,

https://myenterpriselicense.hpe.com/cwp-ui/free-software/SSMC_CONSOLE

Release notes,

https://support.hpe.com/hpesc/public/docDisplay?docId=a00101448en_us&docLocale=en_US

 

Administrator guide (SSMC 3.6)

 

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00085216en_us&docLocale=en_US (Page 58 onwards)

 

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************


I work for HPE
Accept or Kudo
Highlighted
Occasional Contributor

Re: SSMC 3.3.1 "Fabrics" view of Brocade ports

From the document you highlighted above: "SSMC 3.3.1 will remain available as software installation on select Windows and Linux OS versions."

We dont have a virtual environment to place it at at the moment that is why we are using 3.3.1

 

Highlighted

Re: SSMC 3.3.1 "Fabrics" view of Brocade ports

@kuibird1953 

Yes you are correct. I have corrected my statement in previous post.

I would suggest to log a HPE official support case so that we can investigate this matter further.

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************


I work for HPE
Accept or Kudo
Highlighted
Occasional Contributor

Re: SSMC 3.3.1 "Fabrics" view of Brocade ports

Thanks Subhajit.

I did open a case with HPE(5348436859 ) and their last suggestion was to de-install and re-install the SSMC. I am very hesistant to do that as the SSMC controls 3 different Arrays. I would simply like to know if this is a "Knowned" bug and if it is tryly fixed in newr versions.

Highlighted

Re: SSMC 3.3.1 "Fabrics" view of Brocade ports

Can you please provide the below outputs from 3PAR commandline,

showportdev ns 0:0:1
showportdev all 0:0:1
showportdev fcswitch 0:0:1
showportdev findport 20010022AC02507B 0:0:1

showport -par

Also please provide below output from SN6600-TOP,

switchshow

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

************************************************************************


I work for HPE
Accept or Kudo