Alpha Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

some problem with DS10 box

 
Highlighted
shashi kanth
Super Advisor

some problem with DS10 box

One of my DS10 box is giving some hardware problem, when the box is booting, i am getting the bellow message. Any one tell me what the bellow message indicates ?

** keyboard not plugged in...
1280 Meg of system memory
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
probing PCI-to-PCI bridge, hose 0 bus 2
bus 0, slot 9 -- ewa -- DE500-BA Network Controller
bus 0, slot 11 -- ewb -- DE500-BA Network Controller
bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE
bus 0, slot 14 -- pka -- NCR 53C895
bus 2, slot 4 -- pkb -- NCR 53C895
bus 2, slot 5 -- eia -- DE600-AA
bus 2, slot 6 -- vga -- Permedia - P2V Graphics Controller
bus 0, slot 16 -- pga -- FCA-2354
initializing GCT/FRU at 3ff42000

Error detected by Pchip 0
PERROR = 0070bff6f4680005
Lost Error
PERR

1 REPLY 1
Highlighted
B Corbin
Occasional Advisor

Re: some problem with DS10 box

Sorry for the late reply, How was your summer..

PERR is a PCI parity error. in this case on PCI BUS 0, whick unfortunatley is all the internal devices and PCI slots in the DS10.

I see in the PCI slots there are 2 adapters, A DEPVZ the combo card that has the SCSI controller, 2D graphics and the Ethernet, and a Fibre HBA a KGPSA-DA.

As a first Step reseat any PCI adapters for this error. It has been known to fix many issues with PCI parity errors.

Brian