Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Appliance Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Booting to NTFS partition on a system with Smartstart Raid controller

dan_146
Occasional Contributor

Booting to NTFS partition on a system with Smartstart Raid controller

Hi, we have lots of Compaq servers with Smart Arrays in them. These servers have NTFS partitions. I need to be able to create NTFS boot disk with a driver for the array controller. Normally, NTBOOTDD.SYS would do for a scsi drive, but it doesnt work for a system that boots off its array controller !!. ANYONE ???
1 REPLY
Rob Coates
Occasional Visitor

Re: Booting to NTFS partition on a system with Smartstart Raid controller

Hiya,


I find that gdisk seams to do the trick.