BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Appliance Servers
Showing results for 
Search instead for 
Do you mean 

HP IP Console Switch

Occasional Visitor

HP IP Console Switch

Hi,

We have 3 HP IP Console switches none of which I have been able to communicate with or use for other than as a local KVM switch. When attempting to connect via the serial cable using Hyperterminal, (9600, N81, None), I receive garbage characters as an output. I have tried different null modem cables and different computers/com ports but to avail (including various speeds 115200 etc). If I try to connect the single ethernet port to the LAN, I receive no link light on the LAN switch (as far as I can see there are no LEDs on the Console Switch). I have tried a number of different ethernet cables. I have also tried to connect directly using a cross over ethernet cable to a laptop but IP console viewer fails to find the device.

The fact that this problem exists on all 3 of the HP IP Console units would suggest it is not a hardware failure.

Can anyone shed any light on this?

Many thanks for your help!
1 REPLY
Highlighted
Honored Contributor

Re: HP IP Console Switch

Andrew,

which model of IP KVM switch do you have, have a look at this thread:


http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1077238

HTH

Kris