Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Appliance Servers
Showing results for 
Search instead for 
Did you mean: 

PCL driver problems on PSA 4200

Manfred Weber
Regular Advisor

PCL driver problems on PSA 4200


I have a PSA 4200 with a connected LaserJet 4000TN. My workstation is WinXP.

Printing via PostScript is OK, but for example printing 2 pages per sheet is impossible.

Printing via PCL5e for Text only is OK, but a Word document including pixel graphics will print black areas. After updating the driver (downloaded yesterday) leads to a white area instead of the graphics or at some graphics they are very small (1 * 1 cm instead of 15 * 15 cm).

If I connect this printer using a tcp-port with WinXP built-in driver the printout is correct. Connecting the printer to a PSA 4250 using the same driver as PSA 4200 (downloaded yesterday) everything is fine too.

What may be the reason for the PSA 4200 problem?

Thanks in advance,