Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Appliance Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

TaskSmart C4000 fan control under DEBIAN lenny 5.0

Adam Janas
Visitor

TaskSmart C4000 fan control under DEBIAN lenny 5.0

I have installed hpasm on TaskSmart C4000 server with Debian Lenny 5.0, but FAN's speed still 100%

When I use command "hplog" with parameters, I got:

hplog -f :

ID TYPE LOCATION STATUS REDUNDANT FAN SPEED
1 Basic Fan Processor Zone Normal N/A -------
2 Basic Fan Processor Zone Normal N/A -------
3 Basic Fan Processor Zone Normal N/A -------
4 Basic Fan System Board Normal N/A -------
5 Basic Fan System Board Normal N/A -------
6 Basic Fan Pwr. Supply Bay Normal N/A -------


hplog -t :

ID TYPE LOCATION STATUS CURRENT THRESHOLD
1 ADM1022 System Board Normal 68F/ 20C 118F/ 48C
2 ADM1022 Processor Zone Normal 75F/ 24C 158F/ 70C


hplog -p :

ID TYPE LOCATION STATUS REDUNDANT

Why the fan speeds is blank?