Application Perf Mgmt (BAC / BSM) Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

Cannot capture SNMP Trap from Infoblox in HP Openview

Highlighted
Super Advisor

Cannot capture SNMP Trap from Infoblox in HP Openview

Greeting,

 

I'm trying to capture some snmptraps sent from Infoblox. Below is my configuration in text format:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CONDITION
$e ".1.3.6.1.4.1.7779.3.1.1.1.1"
$G 6
$S 2
$2 "3"
SET
SEVERITY Major
MSGGRP "ESM-Only"
OBJECT "DNS:Infoblox"
CUSTOM "CaseNumber" "_"
TEXT "<$6>"

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Below is the Original message for that trap:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Generic: 6; Specific: 2; Enterprise: .1.3.6.1.4.1.7779.3.1.1.1.1;
Variables:

[1] .1.3.6.1.4.1.7779.3.1.1.1.2.1.0 (OctetString): 172.29.104.175
[2] .1.3.6.1.4.1.7779.3.1.1.1.2.2.0 (Integer): 3
[3] .1.3.6.1.4.1.7779.3.1.1.1.2.5.0 (OctetString): Login
[4] .1.3.6.1.4.1.7779.3.1.1.1.2.4.0 (Integer): 59
[5] .1.3.6.1.4.1.7779.3.1.1.1.2.11.0 (OctetString): A Serial Console login failure has occurred

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Unfortunately it's always displayed as "Unmatched". Please advise further.

 

Thank you!

Jay

2 REPLIES
Honored Contributor [Founder]

Re: Cannot capture SNMP Trap from Infoblox in HP Openview

Is this for HPOM or SiteScope? I ask because this particular formum is more geared to SiteScope/BAC/BSM.

 

Thanks,

 

David

Super Advisor

Re: Cannot capture SNMP Trap from Infoblox in HP Openview

HPOM. Thanks.