Array Setup and Networking
1753851 Members
9425 Online
108808 Solutions
New Discussion

Re: having issues adding nimble lun esxi 5.5, 5.1

 
SOLVED
Go to solution
vmw9
Frequent Advisor

Having Issues Adding Nimble Lun ESXi 5.5, 5.1

I am having some issues with adding the nimble volume as a datastore to esxi 5.5 and 5.1 hosts

I see it mounted as a volume under the iscsi hba but cannot add it as a datastore. When I try to add it I get this under the vmkernel log in esxi

2014-11-11T18:19:40.950Z cpu16:33079)NMP: nmp_ThrottleLogForDevice:2322: Cmd 0x28 (0x412e473eb9c0, 0) to dev "eui.32a8c8e1df68297c6c9ce900e30503fe" on path "vmhba32:C1:T1:L0" Failed: H:0x5 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

Act:EVAL

2014-11-11T18:19:40.950Z cpu16:33079)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "eui.32a8c8e1df68297c6c9ce900e30503fe" state in doubt; requested fast path state update...

2014-11-11T18:19:40.950Z cpu16:33079)ScsiDeviceIO: 2338: Cmd(0x412e473eb9c0) 0x28, CmdSN 0x1cc19 from world 0 to dev "eui.32a8c8e1df68297c6c9ce900e30503fe" failed H:0x5 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-11-11T18:19:40.950Z cpu10:37905 opID=b7ce06ca)Partition: 541: Read of GPT entries (hdrlba=1) failed on "eui.32a8c8e1df68297c6c9ce900e30503fe": I/O error

2014-11-11T18:19:40.950Z cpu10:37905 opID=b7ce06ca)Partition: 644: Read from primary gpt table failed on "eui.32a8c8e1df68297c6c9ce900e30503fe".

2014-11-11T18:19:43.720Z cpu7:33619)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410a20c70e30 network resource pool netsched.pools.persist.iscsi associated

2014-11-11T18:19:43.720Z cpu7:33619)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410a20c70e30 network tracker id 60 tracker.iSCSI.10.60.1.21 associated

2014-11-11T18:19:43.985Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba32:CH:1 T:1 CN:0: iSCSI connection is being marked "ONLINE"

2014-11-11T18:19:43.985Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023d000002 TARGET: iqn.2007-11.com.nimblestorage:nim-ucs-vol1-v53e2c6e4ade1c307.00000004.fe0305e3 TPGT: 99c TSIH: 0]

2014-11-11T18:19:43.985Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 0 L: 10.60.1.226:41552 R: 10.60.1.21:3260]

2014-11-11T18:19:56.828Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StopConnection: vmhba32:CH:3 T:1 CN:0: iSCSI connection is being marked "OFFLINE" (Event:4)

2014-11-11T18:19:56.828Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StopConnection: Sess [ISID: 00023d000004 TARGET: iqn.2007-11.com.nimblestorage:nim-ucs-vol1-v53e2c6e4ade1c307.00000004.fe0305e3 TPGT: 99c TSIH: 0]

2014-11-11T18:19:56.828Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StopConnection: Conn [CID: 0 L: 10.60.1.226:24482 R: 10.60.1.22:3260]

2014-11-11T18:19:56.828Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_TaskMgmtIssue: vmhba32:CH:3 T:1 L:0 : Task mgmt "Abort Task" with itt=0xca0 (refITT=0xc9d) timed out.

2014-11-11T18:19:56.828Z cpu16:33079)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: NMP device "eui.32a8c8e1df68297c6c9ce900e30503fe" state in doubt; requested fast path state update...

2014-11-11T18:19:56.828Z cpu16:33079)ScsiDeviceIO: 2338: Cmd(0x412e473eb9c0) 0x28, CmdSN 0x1cc35 from world 0 to dev "eui.32a8c8e1df68297c6c9ce900e30503fe" failed H:0x5 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-11-11T18:19:56.828Z cpu10:37905 opID=b7ce06ca)Partition: 541: Read of GPT entries (hdrlba=4294967295) failed on "eui.32a8c8e1df68297c6c9ce900e30503fe": I/O error

2014-11-11T18:19:56.828Z cpu10:37905 opID=b7ce06ca)Partition: 649: Read from both primary and secondary gpt table failed on "eui.32a8c8e1df68297c6c9ce900e30503fe".

2014-11-11T18:19:56.828Z cpu10:37905 opID=b7ce06ca)WARNING: Partition: 1112: Partition table read from device eui.32a8c8e1df68297c6c9ce900e30503fe failed: I/O error

2014-11-11T18:19:56.828Z cpu1:33003)ScsiPath: 3620: Command 0xa3 (cmdSN 0x0, World 0) to path vmhba32:C3:T1:L0 timed out: expiry time occurs 5579ms in the past

2014-11-11T18:19:56.828Z cpu1:33003)VMW_SATP_ALUA: satp_alua_issueCommandOnPath:651: Path "vmhba32:C3:T1:L0" (UP) command 0xa3 failed with status Timeout. H:0x3 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-11-11T18:19:59.601Z cpu7:33619)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410a20dac2c0 network resource pool netsched.pools.persist.iscsi associated

2014-11-11T18:19:59.601Z cpu7:33619)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410a20dac2c0 network tracker id 60 tracker.iSCSI.10.60.1.22 associated

2014-11-11T18:19:59.857Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba32:CH:3 T:1 CN:0: iSCSI connection is being marked "ONLINE"

2014-11-11T18:19:59.857Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023d000004 TARGET: iqn.2007-11.com.nimblestorage:nim-ucs-vol1-v53e2c6e4ade1c307.00000004.fe0305e3 TPGT: 99c TSIH: 0]

2014-11-11T18:19:59.857Z cpu7:33619)WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 0 L: 10.60.1.226:21309 R: 10.60.1.22:3260]

2014-11-11T18:20:07.269Z cpu2:32807)ScsiDeviceIO: 2338: Cmd(0x412e473eb9c0) 0x1a, CmdSN 0x1ccb7 from world 0 to dev "naa.60060160de051b00269e16130d21dd11" failed H:0x5 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-11-11T18:20:10.100Z cpu10:37905 opID=b7ce06ca)Vol3: 716: Couldn't read volume header from control: Not supported

2014-11-11T18:20:10.100Z cpu10:37905 opID=b7ce06ca)Vol3: 716: Couldn't read volume header from control: Not supported

2014-11-11T18:20:10.100Z cpu10:37905 opID=b7ce06ca)FSS: 5091: No FS driver claimed device 'control': Not supported

2014-11-11T18:20:11.776Z cpu10:37905 opID=b7ce06ca)VC: 2059: Device rescan time 63346 msec (total number of devices 59)

2014-11-11T18:20:11.776Z cpu10:37905 opID=b7ce06ca)VC: 2062: Filesystem probe time 3598 msec (devices probed 58 of 59)

2014-11-11T18:20:11.776Z cpu10:37905 opID=b7ce06ca)VC: 2064: Refresh open volume time 48 msec

2014-11-11T18:20:21.779Z cpu0:32805)ScsiDeviceIO: 2338: Cmd(0x412e47a85940) 0x1a, CmdSN 0x1d133 from world 0 to dev "naa.60060160de051b007e6f3f82048ce111" failed H:0x3 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.

2014-11-11T18:20:22.174Z cpu20:34892)NMP: nmp_ThrottleLogForDevice:2322: Cmd 0x28 (0x412e47a85940, 0) to dev "eui.32a8c8e1df68297c6c9ce900e30503fe" on path "vmhba32:C3:T1:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0.

3 REPLIES 3
rfenton4
Honored Contributor
Solution

Re: having issues adding nimble lun esxi 5.5, 5.1

Hi Tony,

This looks like there is some connectivity issues with your hosts communicating to the storage device (I/O errors and Sense Data errors).  So it looks like there maybe an issue with your physical or ESX network configuration.

Would it be possible to log a call with support as I am sure they will assist and guide you through your ESX networking setup.

I'd also highlight the excellent VMWare Integration guide.  You will find this off InfoSight > Downloads > Integration Kits  > Nimble Connection Manager for VMWare > VMware Integration Guide.  Quick link is here

Chapter 2 will guide you through the Networking and ESX configuration best practices

Cheers

Rich

vmw9
Frequent Advisor

Re: Having Issues Adding Nimble Lun ESXi 5.5, 5.1

yes it was an issue with the initiator ports not set at 9216 mtu.

once that was set, everything started working fine

thanks

rfenton4
Honored Contributor

Re: Having Issues Adding Nimble Lun ESXi 5.5, 5.1

Excellent thanks for coming back and updating the thread for future reference - glad it's all sorted !!