HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Array Setup and Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

Initiator Group Question

 
SOLVED
Go to solution
bill_blair135
Occasional Contributor

Initiator Group Question

If initiators within an initiator group has an IP addresses associated with it, does that mean the initiator IQN can only be allowed to mount the volumes from that IP address?  And if one does not have an IP address associated with it, will it accept the IQN from an IP address?

Thanks,

Bill

1 REPLY
tmoore106
Trusted Contributor
Solution

Re: Initiator group question

To gain access to a volume the initiator must match both the IQN and the IP address if it was provided. If you use * for the IQN or IP unrestricted initiator connections will be allowed. So yes, and yes if you use *.