Array Setup and Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

Monitor Temperature via CLI

 
SOLVED
Go to solution
jstear120
Occasional Visitor

Monitor Temperature via CLI

I have searched around and am trying to find a way to monitor the temperature in our arrays via CLI.  I already have our arrays integrated with Nagios and would like one more thing to monitor and graph.  We have CS210's and am on 2.2.8 currently.

2 REPLIES
pfrisoli27
Valued Contributor
Solution

Re: Monitor Temperature via CLI

hello,

have you checked the CLI reference guide located within the Support site under the OS tab. P.24 shows temperature information of the array (search temperature). this may be what you seek - if not, reach out to support and they should be able to clarify. hope this helps.

jstear120
Occasional Visitor

Re: Monitor Temperature via CLI

Paul,

Thanks for that.  I looked through the CLI reference guide, but overlooked the Temperature sensors output.