Array Setup and Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

OCA Help for Nimble Configuration

 
SOLVED
Go to solution
Shu_Mookerjee
Occasional Contributor

OCA Help for Nimble Configuration

Hi Folks, 

I'm working on a Nimble configuration. When I run the CLIC check, it tells me that my config is "unbuiladable" because "support services are required for all Nimble storage products...". However, when I go to the "Services" tab and select the Nimble Services, the appropriate selections (The Nimble Timeless Services) are greyed out. 

And even if I select Proactive Support Manager Services, I still get the error. 

Any suggestions on where I can find out what I'm doing wrong? 

Thanks,

Shu 

2 REPLIES
Highlighted
MarkOS
Occasional Visitor
Solution

Re: OCA Help for Nimble Configuration

I'm not sure what your problem could be, but make sure you selec the right services tab from the right "Component" in your configuration (in case you have more than just Nimble). And the support services are not selected from the Nimble Services tab, but from the Support & Installation Summary tab, and you can edit and select the appropriate level of support there.

Attached is a screen capture as a reference.

Shu_Mookerjee
Occasional Contributor

Re: OCA Help for Nimble Configuration

Thanks, MarkOS.  That did the trick!