Array Setup and Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

installing ncm 3.4 with update manager

Highlighted
vmw9
Frequent Advisor

installing ncm 3.4 with update manager

i am trying to instlale ncm 3.4 with update manager but it does not seem to work

I imported the zip file and create base line. attached to host and install. vsphere shows remediate entry done but nothing happens

I went to ssh and checked no nimble plugin installed

4 REPLIES
chris24
Respected Contributor

Re: installing ncm 3.4 with update manager

Can you install the VIB manually, or does that return an error?

Cheers,

Chris

wvanhoolst45
Valued Contributor

Re: installing ncm 3.4 with update manager

if this is on ESX 6 you need to reboot the host before you can see this is installed. Please read the Nimble Connection Integration Guide you can find on InfoSight

dbauder92
Valued Contributor

Re: installing ncm 3.4 with update manager

Have you tried to see which VIBs will be active after a reboot?

esxcli software vib list --rebooting-image  from the local server or

esxcli --server < server name> vib list --rebooting-image

To see which VIBs have been installed:

esxcli software vib list

james_c_stein42
Occasional Advisor

Re: installing ncm 3.4 with update manager

I had the same issue, rebooting did not resolve it, though a manual install/reboot took care of it.