Array Setup and Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

vMware iSCSI LoginTimeout

SOLVED
Go to solution
lindy37
Advisor

vMware iSCSI LoginTimeout

New to Nimble coming from Equallogic.  On Equallogic we set the iSCSI the LoginTimeout to 60 seconds (5 seconds default) as a best practice.  Later versions of their MEM driver (NCM) set this feature during the install.  It was also recommended to turn off LRO (Large Receive Offload)  Specifically these settings..(from a 1 to a 0)

  

Net.VmxnetSwLROSL

Net.Vmxnet3SwLRO

Net.Vmxnet3HwLRO

Net.Vmxnet2SwLRO

Net.Vmxnet2HwLRO

On the Nimble, other than installing the NCM do I need to change any settings?

Thanks!

1 REPLY
lindy37
Advisor
Solution

Re: vMware iSCSI LoginTimeout

I just found this...

Nimble Storage InfoSight

KB-000087 Dated January 27 2016.  I going to go with these settings.