Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

2520G-series: Cannot access web UI - Already logged on

 
Highlighted
DCA-RichM
Occasional Advisor

2520G-series: Cannot access web UI - Already logged on

We have a number of 2520-series switches and the majority of them cannot be accessed via the web UI. On entering the username and password, a message appears saying "You are already logged on" and it returns us to the log in screen.

Clearly we are not logged in so I'm guessing there is a session still open in the background which has not been shutdown when we have logged out previously.

Is there any way of killing this session off so we can access the web UI again?

Thanks in advance.

3 REPLIES 3
network_king
HPE Pro

Re: 2520G-series: Cannot access web UI - Already logged on

Hello,

please use kill command from cli

I am an HPE Employee

Accept or Kudo

Highlighted
DCA-RichM
Occasional Advisor

Re: 2520G-series: Cannot access web UI - Already logged on

Hi network-king, thanks for your response.

I have tried the kill command but this seems to do nothing as I still cannot log in.

Highlighted
BjKo
Frequent Advisor

Re: 2520G-series: Cannot access web UI - Already logged on

You could also try the command

web-management idle-timeout 300

and then wait for 5 minutes. The default value should be 10 minutes, though.