Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

2620 ip dhcp-server excluded-address 192.168.1.1 192.168.1.29

 
nsears
Occasional Visitor

2620 ip dhcp-server excluded-address 192.168.1.1 192.168.1.29

Hi people

In setting up a DHCP pool on Procurve, the command to exclude an address or address in range is not accepted with invalid input

Example below

Switchname (config) # ip dhcp-server excluded-address 192.168.1.1 192.168.1.29
Response-
Invalid input: dhcp

Is this the correct command? 

Model is 2620 J9627A release #RA.16.02.0008

Thanks in advance