2920 - Static LACP Trk1 SNMP ifInOctets always zero

[sbr70]

Hello,

I have 2 2920 stacked, and a 2510

Static LACP trunk with 2920-1/19 and 2920-2/19 to/from 2510-19 and 20. This seems to work OK.

I do traffic graphs with Cacti. The Trk1 interface on the 2920 side shows zero traffic.

Some snmpget show that ifInOctets, ifOutOctets, ifHCInOctets, ifHCOutOctets are always zero for the Trk1 interface.

Firmware of 2920s is WB.15.11.0007

On the 2510, i get traffic on the graphs.

Is there something special to configure on the 2920s ?

Regards.

[hdemir]

Hi,

I have similar problem. No solution yet. 

As far as I see there is a time limit to get SNMP OIDs. If you want to get a value more than 1 per second it returns as 0.

There should be a configuration parameter for the timeout value.

Regards.