Aruba & ProVision-based
1748203 Members
3392 Online
108759 Solutions
New Discussion

5406zl Operational Fault troubleshooting

 
RLavin
New Member

5406zl Operational Fault troubleshooting

Hello.  I have a 5406zl that turned all orange the other day. The DIM and FAULT led's are blinking, which I understand means 'an operational fault occurred'. Does that indicate the management card itself failed, or something else? I have removed all other cards and power supplies, cleaned it out completly, re-installed the power supplies and management card, held down 'clear+reset' and it still comes up with these indicators. I have since re-installed the port cards.

1 REPLY 1
Uma_Maheswar
Frequent Advisor

Re: 5406zl Operational Fault troubleshooting

It's a DIMM (RAM) fault.

 

Contact HP for replacement Management Module.

 

Once you get the module, either you can replace the Module or only the DIMM