Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Applying ACL's (ip access-group) to default VLAN 1 HP ProCurve ZL5406

SOLVED
Go to solution
null0dev
Occasional Visitor

Applying ACL's (ip access-group) to default VLAN 1 HP ProCurve ZL5406

Hello all,

any info on the matter would be helpfull.

Here's the rule:

ip access-list extended "109"
10 permit ip 192.168.1.0 0.0.0.255 192.168.0.0 0.0.255.255 log
exit

 

 

Here's the result

(vlan-1)# ip access-group 109 out
<cr>
Commit failed.
(vlan-1)#

 

4 REPLIES
null0dev
Occasional Visitor

Re: Applying ACL's (ip access-group) to default VLAN 1 HP ProCurve ZL5406

Additional info....

Software revision  : K.15.16.0008       
  ROM Version        : K.15.30

VLAN 1 is set as the default and primary vlan.

 

null0dev
Occasional Visitor
Solution

Re: Applying ACL's (ip access-group) to default VLAN 1 HP ProCurve ZL5406

Solved.

So the answer is no ACL's can applied on a mgmt vlan.

But the message was just "Commit failed."

!!!

 

RFVIT
Occasional Visitor

Re: Applying ACL's (ip access-group) to default VLAN 1 HP ProCurve ZL5406

I also have this issue, although not applying it to a managemnt VLAN.

 

mac-access-list standard "200"
10 deny xxxxxxxx log

 

I get this:

VLAN 31: ip access-group 200 in/out/vlan-in
Commit failed.

GuruP
Valued Contributor

Re: Applying ACL's (ip access-group) to default VLAN 1 HP ProCurve ZL5406

Works for me but i have the later build K.16.02.0012 running in 5412zl. Please try with the 16.02.XX build