Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Aruba 2930F QinQ (BPDU throttling)

 
SOLVED
Go to solution
Occasional Contributor

Aruba 2930F QinQ (BPDU throttling)

I'm configuring some 2930F 8-port switches.  I have 3 VLANs.  End-user wants QinQ enabled.  I navigate in CLI to config> directory and enter "QinQ SVLAN" and I get a "QinQ cannot be enabled when BPDU throttling is enabled".  I cannot find where BPDU is whatsoever.  I'm not an IT person typically so much of this is foreign to me.

2 REPLIES 2
HPE Pro

Re: Aruba 2930F QinQ (BPDU throttling)

Hello

BPDU throttle is explained here on page 143-145

https://support.hpe.com/hpesc/public/docDisplay?docId=a00091305en_us

Here are the commands to disable it.

HP-Switch# config
HP-Switch(config)# no spanning-tree bpdu-throttle
HP-Switch(config)# exit

The same manual alsp provides all the information about QinQ, this is chapter 13, page 341. You can consult this guide if you have any further questions regarding the QinQ configuration.

 

I am an HPE employee

Accept or Kudo


HPE Pro
Solution

Re: Aruba 2930F QinQ (BPDU throttling)

Hello! Please if your query was answered mark this topic as solved. If not we would be grateful to hear feedback from you! Many thanks in advance!

I am an HPE employee

Accept or Kudo