- Community Home
- >
- Networking
- >
- Switching and Routing
- >
- Aruba & ProVision-based
- >
- Re: BYOD Help!
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-28-2016 09:31 AM
11-28-2016 09:31 AM
BYOD Help!
I am looking at implementing a BYOD solution for our Sixth Form. I have installed 4 Aerohive AP230s and will use Hive Manager Cloud Management to manage the wireless network side of the solution.
I have the following resources:
1 HP Switch 5406zl (J8697A) (Core)
1 HP 2530-48G-PoEP Switch (J9772A) (Edge - Sixth Form)
4 Aerohive AP230 Access Points
1 Aerohive Hive Manager
1 Microsoft Network Policy Server (RADIUS)
1 Smoothwall UPS S8 Appliance
The two switches are linked by a 1GB fibre connection.
I have created 2 VLANs: VLAN 10 and VLAN 20
VLAN 10 is named CORP_VLAN for Teachers and Staff access
VLAN 20 is named BYOD _VLAN for BYOD traffic internet access only
I have a RADIUS Server setup to use 802.1x Windows Authentication for both VLANs
On the core switch B3 connects to port 49 of the Edge switch and this is the fibre uplink connection.
The configuration of the 2 switches is as follows:
Core Switch: VLAN 1 Default_VLAN (Primary)
IP Address: 10.1.0.23
SM: 255.255.0.0
GW: 10.1.0.19
Ports Tagged: None
Ports Untagged: A1-A9,A11-A24,B1-B24,C1-C24
Core Swtich: VLAN 10 CORP_VLAN
IP Address: 10.6.0.10
SM: 255.255.0.0
GW: 10.1.0.19
Ports Tagged: B3
Ports Untagged: None
Core Switch VLAN 20 BYOD_VLAN
IP Address: 10.5.0.10
SM: 255.255.0.0
GW: 10.1.0.19
Ports Tagged: B3
Ports Untagged: None
Sixth Form Switch VLAN 1 Default_VLAN (Primary)
IP Address: 10.1.0.197
SM: 255.255.0.0
GW: 10.1.0.19
Ports Tagged: None
Ports Untagged: 1-24 29-52
Sixth Form Switch VLAN 10 CORP_VLAN
IP Address: 10.6.0.10
SM: 255.255.0.0
GW: No Gateway
Ports Tagged: 49
Ports Untagged: 25-28
Sixth Form Switch VLAN 20 BYOD_VLAN
IP Address: 10.5.0.10
SM: 255.255.0.0
GW: No Gateway
Ports Tagged: 49
Ports Untagged: 25-28
DHCP Config:
Scope 10.1.0.0 (Default Scope | Default_VLAN)
Address Pool: 10.1...0.0 - 10.1.20.254
Router: 10.1.0.23 (Core Switch)
DNS Servers: 10.1.0.125, 10.1.0.126
Domain Name: acaciahighschool.local
Scope 10.5.0.0 (BYOD_VLAN)
Address Pool: 10.5.0.50 - 10.5.20.254
Router: 10.5.0.10
DNS Servers: 10.1.0.125, 10.1.0.126
Domain Name: acaciahighschool.local
Scope 10.6.0.0 (CORP_VLAN)
Address Pool: 10.6.0.50 - 10.6.20.254
Router: 10.6.0.10
DNS Servers: 10.1.0.125, 10.1.0.125
Domain Name: acaciahighschool.local
Hi
The APs are all recieving IP addresses from VLANs 10 and 20, but when probing for VLANs from the AP230s they cannot find any VLAN apart from the Default_VLANs
My question is does the switching and routing look consistent and correct in combination with the DHCP scopes that are setup for the associated VLANs.
I would really appreciate some expert guidance on this
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2017 05:29 AM
03-12-2017 05:29 AM
Re: BYOD Help!
I think you need to look at your IP addressing first - you have some mismatches with the subnet ranges and the gateways that should be in those ranges based on what you have posted.
eg IP Address: 10.6.0.10
SM: 255.255.0.0
GW: 10.1.0.19 <-- should this be 10.6.0.19?
See http://www.subnet-calculator.com/cidr.php as a good tool for helping with IP addressing
It also looks like the VLANs 10, 20 have the same untagged ports 25-28 - you can only have one untagged VLAN per port. One VLAN should be tagged.