Aruba & ProVision-based
Showing results for 
Search instead for 
Did you mean: 

Configuration 802.1x on pro curve 2910 al

Occasional Visitor

Configuration 802.1x on pro curve 2910 al

Hello. I added code which below when apply 802.1x configuration in switch.

radius-server host key "*******"
radius-server timeout 15

"aaa authentication port-access eap-radius
aaa authorization commands radius
aaa port-access gvrp-vlans
aaa port-access authenticator 13
aaa port-access authenticator 13 unauth-vid 35
aaa port-access authenticator active"

But I getting error which below in server side.

"An Access-Request message was received from RADIUS client with a Message-Authenticator attribute that is not valid."

I did not understand why I am getting error. I'll be glad if you can help me. Thanks in advance. :)