Configure: Switch to Phone to PC

[bickyz]

Broadband

|                       ADSL (192.168.1.x)

|                              |

|                              |
- - - -L3 Switch- - -

             |

             |

           LAN (10.1.1.x) - - - -PHONE-----PC1

My L3 switch has two WAN connections. Generally all LAN clients access Internet via Broadband. All clients gets 10.1.1.x ip address. There is one PC who is connected to Phone and Phone is connected to the Switch.

Is there anyway I can configure switch so that Phone will get 10.1.1.x ip and PC will get ip from ADSL.

VLAN 100 (LAN 10.1.1.x)

VLAN 200 (ADSL 192.168.1.x)

Phone is connected to port 8 of the switch.

[AAPP Toledo]

Hi bickyz,

1) What's the model of the L3 Switch (HP 2600, 2800, 5400, etc)?

2) It's a Cisco Ip Phone? What's the model of the Ip Phone?

Thanks in advance...

[bickyz]

Procurve 8212zl

Phone: Toshiba IPT2010 (IP Enterprise Telephone)

[Alex_Ke]

Hi,

I dont found any infos about your phone device. But if your phone support vlan (802.1 q), just configure port 8 on your switch for vlan 100 as tagged and vlan 200 as untagged. Second step is configuration of your phone.

As attachment is a little sample configuration for cisco devices.