Configuring multiple VLAN's across two switches

[Jarvis1]

Hi All,

I would like if someone could help me,

I have two 2530-48Poe switches, one in each building interconnected by wifi links, but I want to create 3 VLANs, DATA, VOIP and CAMERA SYSTEM. I still do not have any settings made.

Please if someone could send me an example.

Thank you in advance.

[johnk3r]

What is your problem / problem in this configuration?

[Jarvis1]

Thank you for answering...

I have two buildings connected with wifi P2P and a hp switch 2530 at each point, everytrhing is working well so far, bu
I need to create 3 vlans and that they can communicate in both points, exactly like the picture attached.

So far I have this configuration in both side:

vlan 10, ports 10-20 unttaged

vlan 20 ports 21-31  unttaged

vlan 30 ports 32-42 unttaged

trunk trk1 port 5 tagged.

Thank you in advance.

[Linkk]

Please keep in mind that a "HP-trunk" is a link-aggregation and not the same as a "Cisco-Trunk".

You need to set the vlans also tagged on trk1