Aruba & ProVision-based

Re: Connect switch 1920S to another 1920S

 
SOLVED
Go to solution
jopeme
Advisor

Connect switch 1920S to another 1920S

Hello.
We have a Switch (1) connected and working with several vlan's and port 24 connects to a firewall that is the one that manages the vlan's.
Now we have to connect another switch (2) that has other vlan's other than switch 1 and I want them to go to the internet the same as those of switch 1.
I think I should configure, as in the example, the 4 vlan on switch 1 on port 23 in tagged mode and on 24 also tagged.
On port 24 of switch 2. Am I correct? Do you have to configure something else on the port that connects both switches?

Thanks in advance.

Configuracion switeches HP en Moratalaz con vlanes.PNG

7 REPLIES 7
akg7
HPE Pro

Re: Connect switch 1920S to another 1920S

Hello,

Are you adding switch 1 as uplink for switch 2?

-----------

Firewall  |

-----------

|

|  (Port 23--Tagged)

switch 1 (port 23--Tagged) -- (Port 24 Tagged) Switch 2 

If the setup is similar like above then you need to pass other vlans on from switch 2 to switch 1 to Firewall.

Thanks!

 

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the companyAccept or Kudo
jopeme
Advisor

Re: Connect switch 1920S to another 1920S

 
jopeme
Advisor

Re: Connect switch 1920S to another 1920S

I don't quite understand what you mean when you talk about whether switch 1 is an uplink to switch 2. My english is quite poor.

Thanks in advance. 

akg7
HPE Pro

Re: Connect switch 1920S to another 1920S

Hello,

Is the connectivity like below?

 

Coonectivity.jpg

Thanks!

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the companyAccept or Kudo
jopeme
Advisor

Re: Connect switch 1920S to another 1920S

Yes. It is.

 

akg7
HPE Pro
Solution

Re: Connect switch 1920S to another 1920S

Hello,

Then I believe you are passing other vlans from switch 2 to switch 1 to Firewall.

Rest looks fine.

Thanks!

 

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the companyAccept or Kudo
jopeme
Advisor

Re: Connect switch 1920S to another 1920S

It is the solution. It works fine.

Thanks a lot.