Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Default conduct for incoming frames with priority on HP2510 SW

 
Highlighted
nlmnt
Occasional Visitor

Default conduct for incoming frames with priority on HP2510 SW

Hello everyone here's a question:

I've got a switch (for example 2510) with settings of VLANs, but without CoS/QoS settings (like switch from the box, by default).

So if that switch will receive some frames with CoS priority 5 and some frames with priority 0, will that switch use that priority or it will be like all frames are equals?

 

 

 

1 REPLY 1
3Naga
HPE Pro

Re: Default conduct for incoming frames with priority on HP2510 SW

Hi,

Thank you for writing 

Yes the switch will consider all frames as the same if there are no Qos/Cos in place.The interface always consider the values that the incoming frames are configured with,it does not alter, it just forwards tased on the priority its has been sent with.Therefore it will consider all frames as same if there is no specific Qos/Cos in place.

I work for HPE
Accept or Kudo