Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Event Time/Date Correct, but not in CLI (2510G-48)

 
SOLVED
Go to solution
Highlighted
Dtere1
Occasional Visitor

Event Time/Date Correct, but not in CLI (2510G-48)

Hi All,

 

When logging into the CLI on all of our switches the TIMEP and SNTP are both disabled for time sync.  The date in the CLI displays a date from the early 1990s.  This is what I would expect.

 

However, when logging into the web interface of the switches, the time displays as the current date / time, except offset by about 50 minutes.

 

What would cause the date/time in the web interface to be different than the CLI date/time? 

 

These switches ARE part of a stack.

 

Thanks for any input.

2 REPLIES 2
Richard Brodie_1
Honored Contributor
Solution

Re: Event Time/Date Correct, but not in CLI (2510G-48)

I would guess it's applying an offset to the browser's local time.

 

An hour for DST - 10 minute clock skew?

 

Dtere1
Occasional Visitor

Re: Event Time/Date Correct, but not in CLI (2510G-48)

That looks like it!

 

The switch was grabbing the system time of the local computer, not sure how it knew to offset the time from the switch, but it does.